SERVO Products Puts The Industry Standard Power Feed To Work For You
Get a smoother surface finish, higher accuracy and better repeatability. Reduce operator fatigue and increase your productivity, while you increase tool life. With SERVO Products' electronically controlled power feeds. |
 |
|
Now, your class 1 manual mill can deliver semi-automated machining with superior speed regulation, ramping and dynamic braking. Plus Servo Products' power feeds feature an integral safety clutch and circuit breaker for overload protection. |
|
Call Dan Staehle at 414-315-3436 today to order!
Type 200 - Knee Feeds
- Semi-automated machining on Class 1 mills up to 5 hp.
- Peak torque (half-wave series motor): to 200 in-lb / 22.6 N*m torque
- Intermittent torque: 150 in-lb / 17.0 N*m
- Continuous torque: 120 in-lb / 13.0 N*m
- Variable feed rate: 0-12 ipm / 0-305 mm/min. (knee).
- Rapid traverse: 12 ipm / 305 mm/min. (knee).
- Gear reduction ratio (motor to screw shaft): 72:1.
- Helical gearing and torque limiting friction safety clutch with new and improved gear.
- Electrical: 110V, 50/60 Hz, 4.0 Amps.
- Approximate weight: 21 lb. / 9.4 kg.
Type 140 - Knee, Table, and Cross Feeds
- Semi-automated machining on Class 1 mills to 3 hp.
- Peak torque (half-wave series motor): to 140 in-lb / 15.8 N*m torque
- Intermittent torque: 105 in-lb / 11.9 N*m
- Continuous torque: 90 in-lb / 10.2 N*m
- Variable feed rate: .75-25 ipm / 19-635 mm/min. (table and cross); 0-12 ipm / 0-305 mm/min. (knee).
- Rapid traverse: 35 ipm / 889 mm/min. (table and cross); 12 ipm / 305 mm/min. (knee).
- Gear reduction ratio (motor to screw shaft): 72:1.
- Helical gearing and torque limiting friction safety clutch with new and improved gear.
- Electrical: 110V, 50/60 Hz, 2.5 Amps.
- Approximate weight: 15 lb. / 6.8 kg.
Type 150 - Table and Cross Feeds
- Semi-automated machining on Class 1 mills to 3 hp
- Peak torque (full-wave SCR control compound DC motor): to 150 in-lb / 17 N*m torque
- Intermittent torque: 120 in-lb / 13.6 N*m
- Continuous torque: 100 in-lb / 11.3 N*m
- Variable feed rate: .50-35 ipm / 13-889 mm/min.
- Rapid traverse: 35 ipm / 889 mm/min.
- Gear reduction ratio (motor to screw shaft): 72:1
- Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. at full torque.
- Superior speed regulation, ramping, dynamic braking, friction safety clutch and limiting circuit protection.
- Helical gearing and torque limiting friction safety clutch with new and improved gear.
- Electrical: 110V, 50/60 Hz, 3 Amps.
- Approximate weight: 15 lb. / 6.8 kg.